Symmetricom TimeCreator 1000 User Manual

184 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
CLI Commands
To set the alarm threshold for FER on Port 8 to a value of 750:
tc1000>set alarm-threshold fer port 5 set 750
Remarks: When ports A/11 and B/12 are configured as clients, alarm thresholds
are not used. The alarm is disabled if either threshold, set, or clear is set to zero.
Related:
show alarm-threshold
Level : Power-User and Admin only

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English