Symmetricom TimeCreator 1000 User Manual

204 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
CLI Commands
Show GPS
This command displays the position (latitude, longitude, height), elevation mask
value (positioning filter), mode of operation (manual or automatic), and GPS
satellite tracking status. It also displays information for all satellite vehicles being
tracked: vehicle number, noise ratio, satellite elevation, satellite azimuth.
Command Syntax:
show gps
Example:
tc1000>show gps
Response:
State - disable
Mode - auto
Latitude - N37:22:42.885
Longitude - W121:55:34.702
Height - 13.2
Elevation Mask - 10
Position Hold State - positionHold
Number of tracked: 6
PRN ELEV AZIM C/N
11 34 235 40
16 16 137 39
20 50 313 43
23 32 275 42
31 53 52 42
32 77 0 42
Related: set gps
Level : User, Power-User and Admin

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English