Operating the Equipment Locally
Page 4-56 Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
NOTE…
Audio Description is only available if the input source is either digital or SDI embedded.
Auto Lip Sync Option
To access the Auto Lip Sync
6
option, press the Auto Lip Sync softkey in
the Audio A Menu and select either On or Off. See the text underneath
Table 4.19 on page 4-28 for use of this facility.
Lip Sync Offset Option
NOTE…
This option is only available if the Auto Lip Sync option is set to On.
To access the Lip Sync Offset option, press the Lip Sync Offset softkey in
the Audio A Menu.
Lip Sync Offset
¬ Left Lip Sync Offset : +
® Right `10 ms’ —
l Ins Enter l
l Del Update using softkeys Quit l
Table 4.45: Lip Sync Offset Options
Valid Input Range Description
Min: 0
Max: 50
Lip Sync Offset in milliseconds.
Audio Delay Option
NOTE…
This option is only available if the Auto Lip Sync option is set to Off.
To access the Audio Delay option, press the Audio Delay softkey in the
Audio A Menu.
Audio Delay
¬ Left Audio Delay : +
® Right `111 ms’ —
l Ins Enter l
l Del Update using softkeys Quit l
6
To ensure correct lip sync when working with linear or pre-encoded audio, the option card M2/EOM2/AUDLIN should
be used.
To Next Page
Loading...
