Operating the Equipment Locally
Page 4-20 Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Transport Stream Id
¬ Left Transport Stream Id : +
® Right `1 (0001h)’ —
l Ins Enter l
l Del Update using softkeys Quit l
Table 4.8: Transport Stream Id Options
Selected Option Description
Min: 0
Max: 65535
Step Size: 1
Transport stream identity number.
PMT PID Option
To access the PMT PID option, press the PMT PID softkey in the Service
Info Menu. This shows the Program Map Table Packet Identifier. Use the +
and – softkeys to scroll through the options and then press the Enter
softkey after selecting one of them.
PMT PID
¬ Left PMT PID : +
® Right `32 (0020h)’ —
l Ins Enter l
l Del Update using softkeys Quit l
Table 4.9: PMT PID Options
Selected Option Description
Min: 32
Max: 8190 (1FFEh)
Step Size: 1
Program Map Table Packet
Identifier (PMT PID).
Logical Chan Desc Option
To access the Logical Chan Desc option, press the Logical Chan Desc
softkey in the Service Info Menu. This enables the Logical Channel
Descriptor to be turned On or Off. The information is included in the NIT
(for Australia mainly).
Logical Channel Option
NOTE…
This option is only shown if the Logical Chan Desc option is set to On.
To access the Logical Channel option, press the Logical Channel softkey
in the Service Info Menu. This enables a number to be given to the
Logical Channel.
To Next Page
Loading...
