TANDBERG evolution 5000 E5710 - Output Menu; 4.11.1 Overview

Operating the Equipment Locally
Instruction Manual: evolution 5000 E5710 and E5720 Encoder Page 4-71
ST.TM.E10074.1
4.11 Output Menu
4.11.1 Overview
The Output Menu is selected from the Setup Menu by pressing the Output
softkey. This menu permits the selection of the output parameters. See
Figure 4.17 for the menu structure.
Output
Menu
Output Format
Delivery Descriptor....
Delivery
Descriptor
Menu
Menu options depend on
Descriptor Type selected
Terrestrial
Setup
Menu
Frequency
Modulation Type
FEC (Inner)
Symbol Rate
Orbital Position
West East
Polarisation
Frequency
Modulation Type
FEC (Outer)
FEC (Inner)
Symbol Rate
Cable
Satellite
Descriptor Type
Shaded options are showing status and
cannot be changed.
1
This option is status only unless Manual
has been selected in the Band Plan option
Band Plan
Channel
Frequency
1
Bandwidth
1
Modulation Type
Hierarchy
FEC (HP)
FEC (LP)
Guard Interval
Carriers
Other Frequency
Figure 4.17: Menu Hierarchy – Setup/Output Menu