Operating the Equipment Locally
Instruction Manual: evolution 5000 E5710 and E5720 Encoder Page 4-19
ST.TM.E10074.1
Network Id
¬ Left Network Id : +
® Right `65535 (FFFFh)’ —
l Ins Enter l
l Del Update using softkeys Quit l
Table 4.6: Network Id Options
Selected Option Description
Min: 0
Max: 65535
Step Size: 1
Network identity number.
Service Id Option
This option ties the SDT to the PMT and is the same as the Program
Number in ATSC. To access the Service Id option, press the Service Id
softkey in the Service Info Menu. This enables the Service Identity to be
specified. Use the + and – softkeys to scroll through the options and then
press the Enter softkey after selecting one of them. The information is
included in the PAT, PMT, SDT, EIT and NIT.
NOTE…
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.
Service Id
¬ Left Service Id : +
® Right `1 (0001h)’ —
l Ins Enter l
l Del Update using softkeys Quit l
Table 4.7: Service Id Options
Selected Option Description
Min: 0
Max: 65535
Step Size: 1
Network identity number.
Transport Stream Id Option
To access the Transport Stream Id option, press the Transport Stream
Id softkey in the Service Info Menu. This enables the Transport Stream
Identity to be specified. Use the + and – softkeys to scroll through the
options and then press the Enter softkey after selecting one of them. The
information is included in the PAT, SDT and NIT.
NOTE…
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.
To Next Page
Loading...
