TANDBERG evolution 5000 E5710 - Clip Level Option; External Delay Option

Operating the Equipment Locally
Instruction Manual: evolution 5000 E5710 and E5720 Encoder Page 4-57
ST.TM.E10074.1
Table 4.46: Audio Delay Options
Valid Input Range Description
Min: 111
Max: 3540
Audio Delay in milliseconds.
External Delay Option
To access the External Delay option, press the External Delay softkey in
the Audio A Menu. This parameter is used to compensate for external
delays.
NOTE…
This option is only shown when the Coding Standard is Dolby E Pass-Thru or AC-3 Pass-Thru.
External Delay
¬ Left External Delay : +
® Right `1’ —
l Ins Enter l
l Del Update using softkeys Quit l
Table 4.47: External Delay Options
Valid Input Range Description
Min: 0 ms
Max: 450 ms
Clip Level Option
To access the Clip Level option, press the Clip Level softkey in the
Audio A Menu. This screen enables the audio clipping level to be set.
NOTES…
1. This option is only shown when the Coding Standard is MPEG Layer 2, Linear PCM or Dolby
Digital (AC-3).
2. This option is only displayed when the audio source is analogue.
3. Clip Level refers to the head room above 0 dBu, prior to the audio being clipped.
Clip Level
Audio Clip Level : +
12 dB —
Enter l
Update using softkeys Quit l