Operating the Equipment Locally
Page 4-16 Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Table 4.2: Syntax Options
Selected Option Description Comments
ATSC Advanced Television Standards Committee.
DVB Digital Video Broadcasting. See page 4-17
SI Level Option
To access the SI Level option, press the SI Level softkey in the Service
Info Menu. This enables the service information level to be specified. Use
the + and – softkeys to scroll through the options and then press the
Enter softkey after selecting one of them.
SI Level
SI Level : +
PAT/PMT/CAT only —
Enter l
Update using softkeys Quit l
Table 4.3: SI Level Options
Selected Option Description
PAT/PMT/CAT only Program Association Table/ Program Map Table/ Conditional
Access Table.
PAT/PMT only Program Association Table/ Program Map Table.
Off Elementary streams only.
On PAT/PMT/CAT/TDT/SDT/NIT/EIT – minimum DVB.
On (No EIT) PAT/PMT/CAT/TDT/SDT/NIT.
Program Number Option
To access the Program Number option, press the Program Number
softkey in the Service Info Menu. This enables the Program Number to
be specified. In ATSC this is used as the basis of the PMT PID (same as
Service ID in DVB). The information is included in the Program Association
Table (PAT), Program Map Table (PMT) and VCT.
NOTE…
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.
Program Number
¬ Left Program Number : +
® Right `2’ —
l Ins Enter l
l Del Update using softkeys Quit l
To Next Page
Loading...
