Operating the Equipment Locally
Page 4-66 Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
4.9.3 Audio Languages Menu
The Audio Languages Menu is selected from the Audio Menu by pressing
the Audio Languages softkey. This menu permits the selection of
languages used in the MPEG broadcast.
English is the default language and cannot be changed. Those other
languages which have an asterisk (*) next to them are selected for use,
those without an asterisk are not. To select/deselect a language press the
softkey nearest to it. The asterisk is turned on and off. There are over
forty languages to choose from (see Figure 4.15 for a full list).
Audio Languages
O * English (eng)
l * French (fre) PgDn ê
l * German (ger) l
l * Dutch (dut) Quit l
4.10 Data Menu
4.10.1 Introduction
The Data Menu is selected from the Setup Menu by pressing the Data
softkey. This menu permits the selection of RS-422 synchronous data
channel parameters. If M2/EOM2/DAT is fitted there are additional menus
for RS-422 data and for RS-232 asynchronous data.
See Figure 4.16 for the menu structure.
To Next Page
Loading...
