Indexes
Index-4 Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
manual
previous issues, iv
MCPC. See multiple channels per carrier (MCPC)
mechanical inspection, 2-4
MEM control, 1-14
menu
diagnostics, 6-6
menu formats, 4-11
menu screens
moving through, 4-5, 4-9
mixing level option, 4-61
model number
description, 1-4
model number option, 4-24
modulation type option, 4-74, 4-77, 4-79
motion estimation, 1-9
fully exhaustive, 1-5
macro block, 1-9
moving the equipment, 2-4
MP@ML, 1-8
MPEG-1 audio, 1-12
MPEG-2, 1-8, 1-10, B-6
multiple channels per carrier (MCPC), 1-6
multiplex element manager (MEM), 1-14
multiplexer (mux)
menu, 4-81
RAS option menu, 4-81
mux
fault-finding, 6-10
N
Neilsen AMOL, 4-48
network id option, 4-18
network mask option, 4-21
network name
DVB, 4-17
noise reduction, 6-10
noise reduction option, 4-35
notes
meaning of, vi
O
on air option, 4-82
option modules, B-15
additional audio input module, 3-6
basic interoperable scrambling system (BISS), 3-5
how to see which are fitted/enabled, 3-4
internal remux option module, 3-11
limitations on the number, 3-4
M2/EOM2/AUDLIN audio additional and linear PCM, B-15
M2/EOM2/DAT RS-232 and RS-422 data input, B-15
M2/EOM2/REMUX Remux, B-16
positions, 3-3
remux option module, B-16
RS-232 and RS-422 data input option, 3-8
what’s available, 3-3
orbital position option, 4-80
original option, 4-44, 4-63
other frequency option, 4-77
output
DVB ASI, 1-6, 2-12
on video loss, 1-10, 4-34, 4-35
output format option, 4-72
output on video loss
black screen, 1-10
freeze frame, 1-10
test pattern, 1-10
P
packet length option, 4-82
PCR PID option, 4-83
PID
remapping when remultiplexing, 3-11
PID option, 4-44
PMT PID option, 4-17, 4-20
polarisation option, 4-81
power dip recovery option, 4-26
power LED
unlit, 6-12
power supply, 2-10, B-11
ac, 2-6
ac specification, B-11
colour code, 2-7
problems, 6-11
stand-by switch, 1-16
powering down, 2-16
powering up, 2-16
predefined configurations, 4-88
predefined user configurations, C-3, C-7
default configuration settings, C-3
preliminary checks, 2-4, 6-8
preventive maintenance, 6-3
production info option, 4-61
profile/level option, 4-36
program number option, 4-16
Q
quick configurations, 4-88
R
RAS firmware option, 4-84
rate buffer, 6-10
rear panel
connectors, 1-17, 2-8
description, 1-17
reflex enable option, 4-44
remote control, 4-21
remultiplexing
PID remapping, 3-11
service name remapping, 3-11
remux option module, 3-11, B-16
replacement parts, 6-4
reset encoder, 3-3, 4-30
reset on download, 4-30
resolution
and bit-rate, 1-9
resolution option, 4-39
RF protection option, 4-63
room type option, 4-62
RS-232 and RS-422 data input
connectors, 3-9
RS-232 and RS-422 data input option, 3-8
RS-232 data input option, B-10
RS232 PID option, 4-70
RS-422 data input option, B-10
RS422 PID option, 4-68
S
s/w release option, 4-44
sabus baud rate option, 4-23
sabus data bits option, 4-24
scramble option, 4-84
scrambling
To Next Page
Loading...
