Need help?Do you have a question about the Texas Instruments TMS320x2833 series and is the answer not in the manual?
General| Core | TMS320C28x |
|---|---|
| CPU Frequency (MHz) | 150 |
| Clock Speed | 150 MHz |
| ADC Resolution (bits) | 12 |
| ADC Resolution | 12-bit |
| Communication Interfaces | CAN, SPI, I2C, UART |
| CAN Modules | 2 |
| I2C Interfaces | 1 |
| Operating Temperature Range (°C) | -40 to 125 |
| CPU Bit Size | 32 |
| Flash Memory (KB) | 512 |
| Number of ADC Channels | 16 |
| ADC Channels | 16 |
| PWM | 16 |
| UART Interfaces | 2 |
| Supply Voltage (V) | 1.8, 3.3 |
| Operating Voltage | 1.8V, 3.3V |
Configures flash and one-time programmable (OTP) memory, its features, and power modes.
Explains the CSM's role in protecting on-chip memory access and security levels.
Guides on setting up device security using passwords and key registers.
Describes clock generation, system control, and reset domains.
Details the on-chip oscillator and PLL for clocking, including modes and fail detection.
Introduces the GPIO module, pin multiplexing, and I/O capabilities.
Introduces the PIE controller for managing peripheral and external interrupts.
Details various interrupt sources and their multiplexing within the PIE.
To Next Page