Tormach PCNC 440 - Page 8

Chapter 1
8
UM10372_PCNC440_Manual_0221A
PREFACE
Table of Contents
1. Overview 19
1.1 Specicaons 20
2. Site Planning and Prep 21
2.1 General Site Requirements 21
2.1.1 Space Requirements 21
2.2 Electrical Requirements 22
2.2.1 Grounding 22
2.2.2 Plug Paern 22
2.2.3 Ground Fault Interrupter (GFI) Use 22
2.2.4 Electrical Noise 23
2.2.5 Opons for Electrically Non-conforming Sites 23
3. Installaon 24
3.1 Receiving, Uncrang, and Inial Inspecon 24
3.1.1 Shipment Arrival 24
3.1.2 Moving the Crate 24
3.1.3 Inial Uncrang 25
3.1.4 Shipping Damage or Shortages 25
3.2 Installaon Sequence 25
3.3 Basic Installaon Procedure 25
3.3.1 Stand Assembly 25
3.3.2 Remove Pallet Items 26
3.3.3 Li and Move Mill 26
3.3.3.1 Remove Mill from Pallet 26
3.3.3.2 Li Mill 26
3.3.4 Aach Mill to Stand 27
3.3.4.1 Non-Tormach Stands 27