Chapter 8
146
UM10350_PCNC770_Manual_0916A
Accessories
Stands
These are heavy-gauge, welded sheet metal pedestal bases to support the PCNC mill, with an
enclosed compartment for the mill controller. Each base includes chip pan, backsplash, and chip
guards. The PCNC 1100 deluxe stand includes an integrated coolant kit with 1/8 hp coolant pump.
The coolant kit for PCNC 770 is sold separately.
PN Description
30297 PCNC 1100 Deluxe Machine Stand w/ Coolant Kit
31191 PCNC 770 Machine Stand
31192 PCNC 770 Coolant Kit
Machine Arms
A variety of machine arms and related accessories are available:
PN Description
30286 Machine Arm for PCNC Mill
30555 Tool Tray for Machine Arm
32801 Upper Tool Tray Kit for Machine Arm
34668 Machine Arm for PCNC w/ Full Enclosure
8.3 Tapping Options
Tapping Heads
Each PCNC mill supports tapping with the aid of
tapping heads.
The Tormach Reversing Tapping Head by
Procunier is shown in Figure 8.6.
The following tapping heads are supported:
Figure 8.6
To Next Page
Loading...
