Tormach PCNC 770 - Prototyping Accessories; Injection Molder; CNC Scanner

Chapter 8
153
UM10350_PCNC770_Manual_0916A
Accessories
8.9 Prototyping Accessories
8.9.1 Injection Molder
The Tormach injecon molder turns any
PCNC mill into a small (maximum 1 oz. shot
size) injecon molder for prototyping and
short-run molding (see Figure 8.17). PID
temperature control up to 800°F. Computer
controlled ram speed and dwell me allows
ne tuning of the molding process for a
perfect shot every me.
PN Description
32079 Tormach Injection Molder
8.9.2 CNC Scanner
The CNC Scanner
™
is a digital microscope
(see Figure 8.18) that interfaces with any
PCNC mill to collect dimensionally accurate,
ultra-high resoluon photos of 2D surfaces
(see Figure 8.19). Applicaons include
measurement, reverse engineering, and
quality control.
PN Description
33308 Tormach CNC Scanner V2 Package
Figure 8.18
Figure 8.19
Figure 8.17