Tormach PCNC 770 - Controller Customization

Chapter 3
37
UM10350_PCNC770_Manual_0916A
Installation
3.8 Controller Customization
Date and Time
To set or edit controller’s date and me,
type ADMIN DATE in the MDI eld and
click Enter on keyboard (see Figure 3.20).
This opens a dialog box to enter or edit
date, me, and me zone. Click Close
when nished.
Keyboard Language
If you do not have a USA keyboard (QWERTY) layout, type ADMIN KEYBOARD in the MDI eld and
click Enter on your keyboard (see Figure 3.21).
Next, click on the Layouts tab to change the layout of the keyboard to a dierent language (see
Figure 3.22). Select a layout and click Close when nished.
Touch Screen (oponal)
Refer to documentaon that ships with 17” Touch Screen Kit (PN 35575) for informaon on setup
and calibraon.
Figure 3.20
Figure 3.21
Figure 3.22