Toro 30403 Service Manual

RemovingtheLiftCylinder(continued)
7.Removethelocknut(item8inFigure92)fromtheboltthatretainsthelift
cylindertotheframe.
8.Supporttheliftcylinderandslidethebolt(item15inFigure92)fromthe
liftcylinderandframe.
9.Lowertheliftcylinderfromtheframe.
10.Ifthehydraulicttingsaretoberemovedfromtheliftcylinder,markthetting
orientationforassemblypurposes.Removethettingsfromtheliftcylinder
anddiscardtheO-ringsfromthettings.
InstallingtheLiftCylinder
1.Ifthehydraulicttingswereremovedfromtheliftcylinder,lubricatenew
O-ringswithcleanhydraulicuid,positiontheO-ringstothettings,and
installthettingsintotheliftcylinderports;refertoInstallingtheHydraulic
Fittings(SAEStraightThreadO-RingFittingintotheComponentPort)(page
5–11).Ensurethatthettingsareorientatedcorrectly.
2.Positiontheliftcylindertotheframewiththebarrelendup.
3.Slidethebolt(item15inFigure92)throughtheliftcylinderandframe
mountingholes.
4.Aligntheliftcylindertotheliftarmmountingholes.Slidethecylinderpin
(item12inFigure92)(withacotterpininstalledontheoneend)through
theliftcylinderandliftarm.
5.Securethecylinderpinwiththecotterpin(item13inFigure92).
6.Removethecapsandplugsthatwereinstalledtothehydraulichosesand
ttingsduringtheremovalprocess.
7.PutacoatingofcleanhydraulicuidonnewttingO-rings,installtheO-rings,
andconnectthehydraulichosestothettingsontheliftcylinder.Tightenthe
hoseconnections;refertoInstallingtheHydraulicHoseandTube(O-Ring
FaceSealFitting)(page5–9).
8.Checkthehydraulic-uidlevelinthehydraulicreservoir(frontaxle)andadd
correctquantityofuidifnecessary;refertotheOperator’sManual.
9.Operatethemachinefunctionsslowlyuntilairisoutofsystem;referto
ChargingtheHydraulicSystem(page5–85).
HydraulicSystem:ServiceandRepairs
Page5–112
Groundsmaster
®
3280-D/3320
05138SLRevB

Toro 30403 Specifications

General

Brand	Toro
Model	30403
Category	Lawn Mower
Language	English