IT2200 Reader System with Multimode Capability Installation & Maintenance/Service Guide
3-24
IT2410 Tag Programmer
The IT2410 Tag Programmer
1
is part of a system that is used to program IT2200-
series tags (Figure 3-12). The IT2410 Tag Programmer cannot program ATA tags.The
IT2410 Tag Programmer can be used to select a number of standard formats or
develop a unique, customized format to meet specific application needs.
Figure 3-12 IT2410 Tag Programmer System
Functions
Programmer functions include programming tag data pages, locking fixed data pages,
and interrogating all data pages. Tag data pages can be easily programmed and locked
with a password.
Transferring programmed data to the tag is simple. Once the code is downloaded or
entered into the host, the user issues a command to initiate code transfer to the tag
programmer. The programmer then automatically transfers data to or reads data from
the tag.
1. For complete installation and programming instructions for the tag programmer, refer to
Amtech
® document Intellitag IT2000 Programmer User Guide (Document No. 411013).
To Next Page
Loading...
