Analog input modules
D300529 0115 - BL67 I/O modules6-32
For the parameterization in the resistance value measurement,
only positive numbers (hexadeci-
mal/binary) are used. The positive values can
easily be converted into decimal ones.
The value range:
0 Ω to 10
0 Ω;
0 Ω to 20
0 Ω;
0 Ω to 40
0 Ω;
0 Ω to 10
00 Ω;
is displayed as follows:
000(0)
hex
bis FFF(0)
hex
(decimal: 0 to 4095).
NOTE
A detailed description of the measurement value representation for the analog input
modules in 16 or 12 bit can be found in the Appendix of this manual, page 15-8.
To Next Page
Loading...
