turck BL67 - Resetting the Register Bank; Technical Data

Technology modules
D300529 0115 - BL67 I/O modules12-44
12.3.9 Resetting the register bank
If register REG_SF is written with the signature:
"ld20" = 0 x 6C643230
all default values of the retentive registers including the parameter registers are reset.
If register REG_SF is written with the signature:
"ld48" = 0 x 6C643438
all default values of the retentive registers except the parameter registers are reset.
NOTE
12.3.10 Technical data
Overwritten values are lost.all default values of the retentive registers (incl. parameter regis-
ters) are reset.
Figure 12-21:
Electronic module
BL67-1SSI