turck BL67 - Mechanical Mounting; General Mounting Rules

Mounting and wiring
D300529 0115 - BL67 I/O modules13-2
13.1 Mechanical mounting
13.1.1 General mounting rules
 BL67 is designed to be mounted directly at the machine.
It can be mounted on a mounting plate or on mounting rails.
 A vertical as well as a horizontal mounting of the stations is possible.
 The complete BL67 system is secured to the mounting rail by means of two end brackets. One at
each end of the station.
 The gateway is the first electronic component on a BL67 station.
 The electronic modules are mounted subsequently in the order required.
 Potential isolation can be achieved by mounting a Power Feeding module (power distribution)
before mounting the next module.
 Power Feeding modules can be mounted between the rest of the modules as required.
 An end plate is mounted at the end of each BL67 station to protect the module bus contacts and to
guarantee the protection class IP67.