UTT Technologies System Menu
http://www.uttglobal.com Page 192
1) Download the firmware
Click the Download Firmware hyperlink to download the latest firmware from the UTT
website.
2) Choose the firmware
Click the Choose File button to locate and select the firmware you want to upgrade.
3) Upgrade the firmware
Click the Upgrade button. In the pop-up window appears, click OK to start the
upgrade.
Note:
1) As new versions of the Device’s firmware become available, you can upgrade the
firmware on your Device to take advantage of new features and improved
performance.
2) Please download the firmware that matches the model and hardware version of
your Device.
3) It is recommended that you go to Application > Configuration page to backup the
Device’s current configuration before the upgrade. Normally, the upgrade does
not affect the current configuration of the Device. However, this situation might
happen if the right steps are not followed properly.
4) It is strongly recommended that you upgrade the firmware when the Device is
under light load.
5) During the firmware upgrade, DO NOT power off the Device, press the Reset
button, shut down the PC, or interrupt the process in any way until the operation
is complete. Doing so may cause an unexpected error or even irreparable
hardware damage.
6) After the upgrade is complete, the Device will automatically restart for the new
firmware to take effect, without human intervention.
14.6 Remote Management
If you want to allow HTTP remote management, go to System > Remote Management
page to setup.
To Next Page
Loading...
