UTT Technologies Status Menu
http://www.uttglobal.com Page 196
Memory: Displays the percentage of the current memory usage.
SN: Displays the internal serial number of the product (which may be different
from the surface serial number).
Model: Displays the product model of the device.
Hardware: Displays the hardware version number of the device. When the device
hardware version is V1.0.
Firmware: Displays the software version number of the device.
Notes:
1) The CPU usage and Memory usage are displayed as a status bar and percentage
value. The color of the status bar indicates the usage percentage for each
resource.
When the percentage is below 1%, the bar is blank.
When the percentage is between 1% and 50% (below 50%), the color is
green.
When the percentage is between 50% and 70% (below 70%), the color is
yellow.
When the percentage is equal to or above 70%, the color is red.
2) The above resources usage information indicates the load of the Device. If the
usage percentages are all relatively low, it means that the Device still has the
ability to process more tasks. If they are all very high, it means that the Device is
nearly under the full load. In this case, the network delays may occur if the Device
processes new tasks.
15.3 System Log
In the Status > System Log page, you can view the system logs; also, you can select
the types of logs that you want the Device to store and display.
If you have enabled one or more system log features in the Status > System Log >
Log Management Settings page, you can view the related logs in the Status > System
Log > The System Log Information page, see the following figure.
To Next Page
Loading...
