UTT AC750W - Page 53

UTT Technologies Wireless Menu
http://www.uttglobal.com Page 46
Figure 5-2 Repeater Mode
For the parameter’s meaning of Enable Wireless, Operation Mode, SSID, Wireless
Mode, Channel, Channel Width, Enable SSID Broadcast, please refer to the section:
5.1.1 AP Mode.
AP MAC Address: Specify the MAC address of the peer device.
Security Mode: The encryption mode used in the establishment of a connection
through the WDS function, including four options:
None, WEP, TKIP and AES.
 None: If selected, no encryption algorithms will be used to protect
communication data in the data exchange process.
 WEP: If selected, the WEP encryption algorithm will be used to protect data
during the data exchange process. For details, please refer to the section:
5.2.1 WEP.
 TKIP: If selected, the TKIP encryption algorithm will be used to protect data
during the data exchange process. For details, please refer to the section:
5.2.3 WPA-PSK/WPA2-PSK.
 AES: If selected, the AES encryption algorithm is used to protect data during