Vaisala WXT530 Series User Manual

8.
Sensor and Data Message
Settings
8.1
Sensor Configuration and Data
Message Formatting
This chapter lists the sensor configuration and data message formatting commands for all
communica
tions protocols:
• ASCII
• NMEA 0183
• SDI-12
You can also modify sensor and data message settings with the Vaisala Configuration Tool.
More Information
‣
Error Messaging/Text Messages (page 153)
8.1.1 Wind Sensor
WXT536 WXT535 WXT534 WXT533 WXT532 WXT531
✔ ✔ ✔
8.1.1.1 Checking the Settings (aWU)
W
ith the following command you can check the current wind sensor settings.
Command f
ormat in ASCII and NMEA 0183:
aWU<cr><lf>
Command f
ormat in SDI-12:
aXWU!
a
Device address
WU
Wind sensor settings command in ASCII and NMEA 0183
XWU
Wind sensor settings command in SDI-12
<cr><lf>
Command terminator in ASCII and NMEA 0183
Chapter 8 – Sensor and Data Message Settings
117
sales@streamlinemeasurement.co.uk
01457-864334
www.streamlinemeasurement.co.uk

Vaisala WXT530 Series Specifications

General

Brand	Vaisala
Model	WXT530 Series
Category	Transmitter
Language	English