4.4 Mounting WXT530
The transmitter is easy to install as it does not have any moving parts.
The tr
ansmitter can be mounted on:
• Vertical pole mast
• Sensor support arm
Install the transmitter upright.
The transmitter radiation shield reflects light. If you install the transmitter next to a
p
yranometer or a temperature and humidity sensor, the pyranometer or temperature and
humidity sensor can give incorrect measurements. Install the transmitter on the same level
with the pyranometer or temperature and humidity sensor so that the distance between
the units is approximately 800 mm (31.5 in).
WXT530 Series User Guide M211840EN-D
38
sales@streamlinemeasurement.co.uk
www.streamlinemeasurement.co.uk
To Next Page
Loading...
Need help?
General
