Table 21 Wind Parameters Bits 1-8
Bit Description
1st bit (most left) Dn Direction minimum
2nd bit Dm Direction average
3rd bit Dx Direction maximum
4th bit Sn Speed minimum
5th bit Sm Speed average
6th bit Sx Speed maximum
7th bit output mode
8th bit spare
& delimiter
Bits 9-16 determine the parameters in the data message obtained with the following
commands:
• ASCII: aR0, ar0
• NMEA 0183: aR0, ar0
• SD-12: aM, aMC, aC, and aCC
• SDI-12 continuous:aR and aRC
Table 22 Wind Parameters Bits 9-16
Bit Description
9th bit Dn Wind direction minimum
10th bit Dm Wind direction average
11th bit Dx Wind direction maximum
12th bit Sn Speed minimum
13th bit Sm Speed average
14th bit Sx Speed maximum
15th bit spare
16th bit (most right) 0
Parameter Description
[I]
Update interval: 1 ... 3600 seconds
Chapter 8 – Sensor and Data Message Settings
119
sales@streamlinemeasurement.co.uk
www.streamlinemeasurement.co.uk
To Next Page
Loading...
