Vaisala WXT530 Series User Manual

a!
a
Device address
!
Command terminator
Response:
a<cr><lf>
a
Device address
<cr><lf>
Response terminator
Example:
0!0<cr><lf>
7.3.3 Change Address Command (aAb)
This command changes the device address. After the command has been issued and
responded t
o, the sensor is not required to respond to another command for one second to
ensure writing the new address to the non-volatile memory.
Command format:
aAb!
a
Device address
A
Change address command
b
Address to change to
!
Command terminator
Response:
b<cr><lf>
WXT530 Series User Guide M211840EN-D
92
sales@streamlinemeasurement.co.uk
01457-864334
www.streamlinemeasurement.co.uk

Vaisala WXT530 Series Specifications

General

Brand	Vaisala
Model	WXT530 Series
Category	Transmitter
Language	English