Be careful not to damage the wind transducers located at the top of the
three an
tennas. Dropping the device can break or damage the transducers. If the
antenna bends or twists, re-aligning can be diîš‚cult or impossible.
CAUTION!
Do not remove the top of the package protecting the transducer until you have installed the
transmitter. The polypropylene cushion protects the transducers during installation.
Figure 19 Installing with Protective Packaging
Save the container and the packaging materials for future transportation and shipping.
Chapter 4 – Installation
37
sales@streamlinemeasurement.co.uk
www.streamlinemeasurement.co.uk
To Next Page
Loading...
Need help?
General
