Vaisala WXT530 Series - Polling with CRC; Automatic Mode

0XZRI<cr><lf>
0TX,Inty reset<cr><lf>
Example (
SDI-12):
0XZRI!0<cr><lf> (= device address)
Example (NMEA 0
183):
0XZRI<cr><lf>
$WITXT,01,01,11,Inty reset*39<cr><lf>
7.1.4 Measurement Reset (aXZM)
This command interrupts all ongoing measurements except rain measurement and restarts
them.
C
ommand f
ormat in ASCII and NMEA 0183:
aXZM<cr><lf>
Command format in SDI-12:
aXZM!
a
Device address
XZM
Measurement break command
<cr><lf>
Command terminator in ASCII and NMEA 0183
!
Command terminator in SDI-12
Example (ASCII):
0XZM<cr><lf>
0TX,Measurement reset<cr><lf>
WXT530 Series User Guide M211840EN-D
80
sales@streamlinemeasurement.co.uk
01457-864334
www.streamlinemeasurement.co.uk