Vaisala WXT530 Series - Analog Output

8.1.3 Precipitation Sensor
WXT536 WXT535 WXT534 WXT533 WXT532 WXT531
✔ ✔ ✔ ✔
8.1.3.1 Checking the Settings (aRU)
Use this command to check the current precipitation sensor settings.
C
ommand f
ormat in ASCII and NMEA 0183:
aRU<cr><lf>
Command format in SDI-12:
aXRU!
a
Device address
RU
Precipitation sensor settings command in ASCII and NMEA 0183
XRU
Precipitation sensor settings command in SDI-12
<cr><lf>
Command terminator in ASCII and NMEA 0183
!
Command terminator in SDI-12
The response in ASCII and NMEA 0183:
aRU,R=[R],I=[I],U=[U],S=[S],M=[M],Z=[Z],X=[X],Y=[Y]<cr> <lf>
The r
esponse in SDI-12:
aXRU,R=[R],I=[I],U=[U],S=[S],M=[M],Z=[Z],X=[X],Y=[Y]<cr><lf>
where
[R][I][U][S][M][Z][X][Y] are the setting fields.
Example (ASCII and NMEA 0183, device address 0):
0RU<cr><lf>
0RU,R=11111100&10000000,I=60,U=M,S=M,M=R,Z=M,X=100, Y=100<cr><lf>
Chapter 8 – Sensor and Data Message Settings
127
sales@streamlinemeasurement.co.uk
01457-864334
www.streamlinemeasurement.co.uk