An example of MDA:
$WIMDA,29.88,I,1.0120,B,22.5,C,,C,31.5,,,C,,T,,M,,N,,M*3F
Examples (
ASCII and NMEA 0183, device address 0)
You need the temperature and humidity data to be available in every 30 seconds
Changing the parameter selection:
0TU,R=0101000001010000<cr><lf>
0TU,R=01010000&01010000<cr><lf>
Character '&' is not allowed in the command.
Changing the update interval:
0TU,I=30<cr><lf>
0TU,I=30<cr><lf>
The r
esponse after the change:
0R2<cr><lf>
0R2,Ta=23.9C,Ua=26.7P<cr><lf>
Example (
SDI-12, device address 0)
Changing the temperature unit to Fahrenheit:
0XTU,U=F!0<cr><lf>
To check the da
ta content in SDI-12 mode, you must type 0XTU!.
WXT530 Series User Guide M211840EN-D
126
sales@streamlinemeasurement.co.uk
www.streamlinemeasurement.co.uk
To Next Page
Loading...
