2.4 Backward Compatibility
Always use the latest version of WXT530 Configuration Tool.
The WXT530 series transmitters are fully compatible with WXT520 and WMT52. This applies
to moun
ting, cable options, and communication.
When you upgrade from WMT52 to WXT532 or from WXT520 to WXT536, you must use the
same profile and communication option as you had before. Regenerate the setup files (WXC
files) for WXT530 with the latest version of WXT530 Configuration Tool .
Because the WX
T530 series has several product variants, the old configuration code does
not apply to the ne
w WXT530 sensor. You must generate and apply a new order code for it.
More Information
‣
Vaisala Configuration Tool (page 24)
2.5 R
egulatory Compliances
The electromagnetic compatibility of the WXT530 series has been tested according to the
follo
wing product family standard:
• EN 61326-1 Electrical equipment for measurement, control and laboratory use - EMC
requirements - for use in industrial locations.
• The WXT530 series has been enhanced for marine use according to the appropriate
sections of the IEC 60945 Maritime Navigation and Radiocommunication Equipment
and Systems - General requirements - Methods of testing.
• The WXT530 series is in conformance with the provisions of the RoHS directive of the
European Union:
• Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment (2002/95/EC)
Chapter 2 – Product Overview
25
sales@streamlinemeasurement.co.uk
www.streamlinemeasurement.co.uk
To Next Page
Loading...
Need help?
General
