2. Loosen the 3 mounting screws at the bottom assembly of the transmitter and pull them
out.
1 Fixing screws
2 Top of transmitter
3 PTU module
4 Latch
5 Flat cable
6 O-ring
3. Turn out the top of the transmitter.
4.
Release the small white latch and remove the PTU module.
5. Remove the vacuum bag protecting the PTU module.
6. Connect the new PTU module.
Avoid touching the white filter cap.CAUTION!
WXT530 Series User Guide M211840EN-D
148
sales@streamlinemeasurement.co.uk
www.streamlinemeasurement.co.uk
To Next Page
Loading...
