6. Select Display V
aisala USB Device Finder > Finish. The driver is started.
7. Plug in the cable.
Remember t
o use the correct port in the settings of your terminal program. Windows
recognizes each individual cable as a dierent device, and reserves a new COM port.
Ther
e is no reason to uninstall the driver for normal use. However, if you wish to remove the
driver files
and all Vaisala USB cable devices, uninstall the entry for Vaisala USB Instrument
Driver from the program manager tool in the Windows Control Panel.
WXT530 Series User Guide M211840EN-D
52
sales@streamlinemeasurement.co.uk
www.streamlinemeasurement.co.uk
To Next Page
Loading...
