Vanderbilt SPC42 Series User Manual

The card is unassigned from the user and deleted from the system.
3. To add the card again, you must rescan it.
17.8.2 Adding/Editing User Profiles
NOTICE: Global user profiles cannot be edited in the browser and must be edited in SPC Manager.
To add or edit a user profile:
1. Select Users>User Profiles.
A list of configured profiles is displayed with the number of users assigned to each profile.
2. Click Add User Profile or click the Edit button of the required profile.
The following page is displayed with the configuration options categorized as follows:
- General Settings
- User/Panel Rights
- Access Control
General Settings
1. Enter a User Profile ID that is not currently being used. If you enter an ID that is already used, an
‘ID Unavailable’ message is displayed.
2. Provide a User Profile Name (maximum 16 characters and case sensitive).
3. Select all Areas that will be controlled by this user profile.
4. Select a Calendar to set the time limitations of this profile on the system.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 199 A6V10276959-d
11.2018

Vanderbilt SPC42 Series Specifications

General

Brand	Vanderbilt
Model	SPC42 Series
Category	Power Supply
Language	English