1. Select Configuration > System > Standards.
The following page will be displayed.
2. Configure the fields as described in the following table.
Continent Select the appropriate location for the installation. Options are Europe, Asia,
North America, South America, or Oceania.
Installation
Type
Select the type of installation. Options are Domestic, Commercial or Financial.
Region
Compliance
To change the region on your panel, it is strongly recommended that you default
your panel and select a new region as part of the start up wizard. Select the
region in which the installation is installed and the regional requirements it
complies with.
Some selections will implement local or national requirements which supersede
EN50131 requirements. The options in the Grade area will change depending on
your selection in the Region Compliance area.
Options are UK, Ireland, Europe General (EN), Italy, Sweden, Switzerland,
Belgium, Spain, Germany (VDS), France, Norway, Denmark, Poland,
Netherlands, Finland, Portugal, and Czech Republic.
Grade Select the Security Grade that applies to the installation.
The options in the Grade area will change depending on your selection in the
Region Compliance area.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 267 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
