1-8 SHB WL34 * 2.0
1 Maintenance
Maintenance overview
Work to be performed after 30 operating hours
Check the gearbox, engine and hydraulic system for leaks
Check the hydraulic, water and engine oil radiator for dirt
Check the coolant level and antifreeze
Check the tension and condition of the V-belt
Check the hoses and pipes for secure seating
Check the routing of the hoses and pipes
Check the piston rods of the hydraulic cylinders
Check the routing of Bowden cables and electric cables
Retighten all bolts; pay particular attention to the engine mounting, axle mountings and cardan shaft
Check the instruments and acoustic warning devices
Check the electrical system
Check the brake/inching pedal and parking brake, adjust if necessary
Check the steering system
Check the light system (if equipped)
Check the idling speed
Check the door and engine cover locking mechanism for correct operation
Check the protective ROPS structure
Check the tire condition
Replace the engine oil and engine oil filter
Clean the air filter, replace it if necessary
Replace the hydraulic oil return filter
Perform grease lubrication according to the lubrication plan
Lubricate the cardan shaft
Lubricate with oil: all levers, Bowden cables and hinges
Check all oil levels, add oil if necessary
To Next Page
Loading...
