6 Create Methods, Sample Sets, and Sample Templates
180 July 29, 2013, 715003794 Rev. B
Create a sample template
Using a sample template, you define the major parameters of a run and then
enter variable parameters, such as number of vials, vial position, and so forth
just before you begin the run.
To create a sample template:
1. Create a sample set as described in “Create and edit a sample set” on
page 174.
2. On the Main screen, press the Methods screen key.
3. Select the sample set you want to serve as a sample template.
4. Press the Make Tpl screen key.
Tip: To lock the template, use the procedure in “Lock and unlock a
separation method” on page 150.
To Next Page
Loading...
