C Spare Parts
286 July 29, 2013, 715003794 Rev. B
Separations module spare parts
Vials and low volume inserts
The following table provides information about Waters-supplied: vials and low
volume inserts (LVI) available for use with the separations module, vial and
LVI bottom thicknesses, and syringe draw depth offsets that may be required.
Sample loop, 2-mL WAT096106
Needle Wash Frit (one piece design) for
the Lower Seal Wash Body (5 per pack)
700001318
PerformancePLUS needle 700001247
a. Refer to the table titled “Separations module vials and low volume
inserts:” on page 287 for a complete list of vials, low volume inserts, and
syringe draw depth offsets.
Recommended spare parts for the separations module
Item: Part number:
Cable assembly, AC power WAT270895
Cable assembly, IEEE-488, 1 m WAT087198
Detector drip tray assembly WAT271040
Diffuser assembly (poly) WAT007272
Diffuser assembly (stainless steel, 1) WAT025531
Ethernet Switch Communications
Kit
700004123
Recommended spare parts for the sample management system: (Continued)
Item: Part number:
To Next Page
Loading...
