Separations module overview
July 29, 2013, 715003794 Rev. B 23
– The Waters 2414, 2410, or 410 Refractive Index Detector and the
Waters 2487 Dual Wavelength or Waters 486 Tunable Absorbance
Detector
– The Waters 2487 Dual Wavelength or Waters 486 Tunable
Absorbance Detector
• As a component of an HPLC system controlled by Empower or
MassLynx
™
software that uses IEEE-488 communications
• As a component of an HPLC system controlled by Empower software
and that uses Ethernet communications
• As a component of an HPLC system controlled by a non-Waters data
system that uses RS-232 communications
Solvent bottle tray kits
There are several solvent bottle tray kits available for use with Alliance HPLC
system configurations.
Solvent bottle tray kit options:
System
configuration
Kit part number Where used Description
A series:
Bottle
organizer
176003103 Systems with a
separations
module only
Bottle tray comes with a
removable drip tray and
is stacked atop the
detector. Accommodates
up to two 4-liter bottles
and nine 1-liter bottles.
B series:
Bottle tray and
detector base
176003104 Systems with a
separations
module and a
column heater or
column
heater/cooler
installed
Bottle tray comes with a
removable drip tray and
adjacent detector base.
Enables placement of
detector atop column
heater. Accommodates
up to two 4-liter bottles
and four 1-liter bottles.
C series:
Bottle bucket
176003105 Any Alliance
HPLC system
Free-standing bottle
tray. Accommodates a
combination of 1 to
4-liter bottles.
To Next Page
Loading...
