2 Install the e2695 Separations Module
50 July 29, 2013, 715003794 Rev. B
Connect tubing and attachments
Install B-series detector base and drip tray
In the Alliance HPLC B-series configuration, the solvent bottle tray and
detector base kit (176003104) consists of a solvent bottle tray and adjacent
detachable detector base. The detector drip tray is part of the detector base
(see figure “B-series solvent bottle tray configuration (only single detector
shown):” on page 25).
There are two parts to this procedure:
Caution: To ensure proper drip protection, be sure that the retaining
screws in the solvent delivery and solvent conditioning trays are
tightened before you operate the system.
Connections
complete
Install solvent
supply tubing
Connect waste line
tubing and
reservoir
Install needle wash
and seal wash
reservoirs
Install detector and
drip tray
Prime needle wash,
(seal wash), and
system
Install degasser
vent tubing
Connect column
and detector
Start
To Next Page
Loading...
