3 Prepare the e2695 Separations Module for Operation
86 July 29, 2013, 715003794 Rev. B
More screen key
The More screen key appears on various screens. Pressing it displays an
additional set of screen keys.
Use the keypad
The following table describes the functions of the keypad keys.
Screen keys in the Main screen:
Screen keys Function Reference
Develop
methods
Displays the Methods screen so that
you can create, edit, view, copy,
delete, and run stored methods.
Chapter 6, “Create
Methods, Sample
Sets, and Sample
Templates”
Run samples Displays the Methods screen so that
you can run stored separation
methods, sample sets, and sample
templates.
Chapter 4, “Front
Panel Control”
Diag Displays the Diagnostics screen so
that you can run a variety of
diagnostics. You can also view
current transducer readings.
Chapter 8,
“Diagnostic Testing
and
Troubleshooting”
Config Displays the Configuration screen so
that you can enter values for a
number of parameters.
“Configure the
separations
module” on page 91
Log Displays the error log. “Use the error log”
on page 220
System
Prep
Displays the System Preparation
(System Prep) screen so that you can
run System Prep, initiating a series
of automated steps to effect system
readiness for running samples.
“Run System Prep”
on page 128
To Next Page
Loading...
