viii July 29, 2013, 715003794 Rev. B
Applicable symbols
Audience and purpose
This guide is intended for use by individuals who need to install, operate,
maintain, or troubleshoot the Waters Alliance e2695 Separations Module.
This guide sets forth procedures for unpacking, installing, using, maintaining,
and troubleshooting the Waters Alliance e2695 Separations Module. It also
includes appendixes for specifications, spare parts, and solvent
considerations.
Symbol Definition
Manufacturer
Authorized representative of the European
Community
Confirms that a manufactured product complies
with all applicable European Community
directives
Australia C-Tick EMC compliant
Confirms that a manufactured product complies
with all applicable United States and Canadian
safety requirements
Consult instructions for use
Electrical and electronic equipment with this
symbol may contain hazardous substances and
should not be disposed of as general waste.
For compliance with the Waste Electrical and
Electronic Equipment Directive (WEEE)
2012/19/EU, contact Waters Corporation for the
correct disposal and recycling instructions.
To Next Page
Loading...
