Waters Alliance e2695 - Page 289

Vials and low volume inserts
July 29, 2013, 715003794 Rev. B 289
Assorted Vials with Low Volume Inserts
WAT270946
and
WAT094170
Screw cap vial
with 300-µL LVI
1.57 mm 0 Recommended
configuration
WAT270946
and
WAT094171
Screw cap vial
with 150-µL LVI
1.65 mm 0 Recommended
configuration; has the
lowest sample volume
requirement
WAT094222
and
WAT094170
Snap/crimp vial
with 300-µL LVI
2.27 mm >
1 mm Variable thickness;
add at least 1 mm
offset
WAT094222
and
WAT094171
Snap/crimp vial
with 150-µL LVI
2.30 mm >
1 mm Variable thickness;
add at least 1 mm
offset
Separations module vials and low volume inserts: (Continued)
Part
number
Description
Average
thickness
Offset Comments