Weinmann MEDUCORE Standard2 User Manual

WM 68401 04/2021
MEDUCORE Standard
2
EN 119
6 Operation
3. Carry out a function check (see “5.2 Carrying out a function
check”, page 104).
Result The device is switched on.
6.2 Switching the device off
Requirement The device is switched on (see “6.1 Switching on the device”,
page 118).
1. Press and hold the On/Off button for at least 2 seconds.
Result The device is completely switched off.
6.3 Navigating in the device
Action
Result
In a menu
Within a menu
item
In the start
menu
In a mode
Press the function
button
The function is shown in the display, directly above the function button (e.g. AED or
Back).
Turn the navigation
knob
counterclockwise
Navigate upwards Decrease value Navigate upwards -
Turn the navigation
knob clockwise
Navigate
downwards
Increase value
Navigate
downwards
-
Press the navigation
knob
Select menu item
Confirm the set
value
Select menu item
Activate the application
menu
Press the menu
button
Close the menu Close the menu
Activate the
operator menu
Activate the user menu

Weinmann MEDUCORE Standard2 Specifications

General

Brand	Weinmann
Model	MEDUCORE Standard2
Category	Medical Equipment
Language	English