222 EN MEDUCORE Standard
2
WM 68401 04/2021
7 Disassembling
4. Dispose of used defibrillation electrodes.
5. When used in a protective transport bag: Guide the master
cable through the opening between the side compartment and
the device compartment of the protective transport bag.
Result The defibrillation electrodes/paddles and the master cable have
been disassembled.
7.3 Disassembling pulse oximetry sensor
and pulse oximetry sensor connecting
cable
Requirement • The device is switched off (see “6.2 Switching the device off”,
page 119).
• The device is disconnected from the patient.
1. When used in a protective transport bag: Open the viewing
window and side compartments of the protective transport
bag.
2. Disconnect the pulse oximetry sensor connecting cable with
the selected pulse oximetry sensor from the SpO
2
connection.
To Next Page
Loading...
