356 EN MEDUCORE Standard
2
WM 68401 04/2021
15 Storage
15.3 Storing printer
15.4 Storing printer battery
1. If the printer is not being used for an extended period: Charge
printer battery (see “4.7.1 Charging the printer battery”,
page 94).
2. Store the printer battery separately from the printer.
3. Charge the printer battery after no more than 12 months.
Result The printer battery is stored in a dry place and ready for use.
Delayed therapy due to incorrect storage of the printer!
Storage outside the specified ambient conditions may lead to
printer malfunctions or damage the printer. This may delay the
patient’s therapy.
Always store the printer within the specified ambient
conditions.
In the event of problems with the printer: Carry out a function
check of the printer (see “5.6 Carrying out a function check on
the printer (only with Printing option)”, page 117).
To Next Page
Loading...
Need help?
General
