Weinmann MEDUCORE Standard2 - Disassembling the NIBP Cuff and NIBP Connecting Tube

WM 68401 04/2021
MEDUCORE Standard
2
EN 225
7 Disassembling
2. If the 12-lead ECG extension cable is connected: Disconnect
the 12-lead ECG extension cable from the ECG cable with
connection for 12-lead ECG extension cable.
3. Disconnect the ECG electrodes from the ECG cable clips and
dispose of them.
Result An ECG cable has been disassembled.
7.5 Disassembling the NIBP cuff and NIBP
connecting tube
Requirement • The device is switched off (see “6.2 Switching the device off”,
page 119).
• The device is disconnected from the patient.
1. When used in a protective transport bag: Open the viewing
window and side compartments of the protective transport
bag.