Weinmann MEDUCORE Standard2 User Manual

WM 68401 04/2021
MEDUCORE Standard
2
EN 329
13 Operator menu
13.7.2 Possible values
13.8 NIBP settings
In the NIBP settings submenu, you can make the presets for blood
pressure measurement and venous stasis. You can adapt the
device to the patient group using the specific NIBP settings.
13-11 NIBP settings submenu
Parameter Possible values Description Factory setting
Feed rate
12.5 mm/s
25 mm/s
50 mm/s
Here you can set the feed rate of the
SpO
2
curve display and so change
the time resolution.
25 mm/s
Pulse tone priority
Activated
Deactivated
Here you can set whether pulse tone
is to take priority over heart rate
tone.
The tone level of the pulse tone is
adapted to measured oxygen
saturation.
Activated

Weinmann MEDUCORE Standard2 Specifications

General

Brand	Weinmann
Model	MEDUCORE Standard2
Category	Medical Equipment
Language	English