252 EN MEDUCORE Standard
2
WM 68401 04/2021
10 User menu
10 User menu
The user menu contains functions and settings which affect the
current session and which are not saved permanently as device
presets (except: date and time settings).
If the device was switched off for < 30 s and if, while switched on
previously, patient measured values were determined or a manual
event was saved, the settings made previously in the user menu are
retained.
10.1 Navigating the user menu
Requirement • The device is switched on (see “6.1 Switching on the device”,
page 118).
• The patient group is set (see “6.4 Selecting patient group”,
page 120).
• A mode is set.
1. Press the menu button .
The user menu appears:
2. Select the setting with the navigation knob and confirm.
To Next Page
Loading...
Need help?
General
